Table 080-4: Customer Programming Summary - Miele G 1 Series Technical Information

G 1xxx/G 2xxx
Model
G 118x/G 2170/G 218x
(See Section 4.2.1 for option
descriptions.)
G 1202
(See Section 4.2.2 for option
descriptions.)
G 1262
(See Section 4.2.3 for option
descriptions.)
G 147x/G 247x
(See Sections 4.2.4 and 4.2.5
for option descriptions.)
G 2020
(See Section 4.2.6 for option
descriptions.)
G 2142/G 2143/G 2120/
G 2140/G 2150
(See Sections 4.2.7 and 4.2.8
for option descriptions.)
G 2420/G 243x
(See Section 4.2.9 for option
descriptions.)

Table 080-4: Customer Programming Summary

Access Procedure
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
1. Press and hold Program and
Start/Stop buttons.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Program and Start/Stop
buttons.
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
1. Press and hold Program button.
2. Switch on appliance and wait
approx. 4 sec. for "Rinse & Hold"
LED to light up.
3. Release Program button.
1. Turn the control dial to the 12
o'clock position.
2. Press and hold Start/Stop button.
3. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
4. Release Start/Stop button.
1. Press and hold Start/Stop button.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Start/Stop button.
1. Press and hold Start/Stop button.
2. Switch on appliance and wait
approx. 4 sec. for "Start/Stop" LED
to light up.
3. Release Start/Stop button.
165
Technical Information
Available Options
Water hardness
Rinse aid
Buzzer on/off
Reset standard settings
Water hardness
Rinse aid
Adjust Sensor Wash
Reset standard settings
Rinse aid
Buzzer on/off
Reset standard settings
Check and set water
hardness (up to ID -1080);
activate/ deactivate
softener sensor, set water
hardness (after ID -1080)
Rinse aid
Buzzer on/off
Adjust Sensor Wash
program (after ID -984)
Check water hardness
(after ID -1080)
Reset standard settings
Water hardness (3 o'clock)
Rinse aid (5 o'clock)
Resetting standard
settings (11 o'clock)
Water hardness
Rinse aid
Reset standard settings
Check and set water
hardness (up to ID -1080);
activate/ deactivate
softener sensor, set water
hardness (after ID -1080)
Rinse aid
Adjust Sensor Wash
program (after ID -984)
Check water hardness
(after ID -1080)
Reset standard settings