Physical Description; Operation; Minimum Host System Requirements; Plastic Case Physical Description - Xilinx Platform Cable USB II Manual

Physical Description

The Platform Cable USB II electronics are housed in a recyclable, fire-retardant plastic case
shield attenuates internally generated emissions and protects against susceptibility to radiated emissions.
X-Ref Target - Figure 2
Top View
CERTIFIED
Side View
25.4 mm

Operation

This section describes how to connect and use Platform Cable USB II.

Minimum Host System Requirements

The host computer must contain a USB Host Controller with one or more USB ports. The controller can reside on the PC
motherboard, or can be added using an expansion or PCMCIA card.
Platform Cable USB II is designed to take full advantage of the bandwidth of USB 2.0 ports, but it is also backward-
compatible with USB 1.1 ports. Refer to
connection environments and bandwidth.
Table 1 lists Platform Cable USB II compatibility with the Xilinx design tools.
DS593 (v1.2.1) March 17, 2011
Platform Cable USB II
Model DLC10
Power 5V
Serial XU - 12345
HI-SPEED
USB
Made in U.S.A.
Figure 2: Plastic Case Physical Description
USB Hub Types and Cable Performance, page 28
®
2mm
CONNECTOR
SIGNALS
JTAG or Serial or SPI
HALT INIT WP
---- ---- ----
0.15A
TDI DIN MOSI
TDO DONE MISO
TCK CCLK SCK
TMS PROG SS
VREF VREF VREF
1.5 < VREF < 5.0 VDC
115.6 mm
www.xilinx.com
Platform Cable USB II
(Figure 2). An internal EMI
STATUS
PGND
Gnd
Gnd
Gnd
Gnd
Gnd
----
for additional information on
53.3 mm
16.5 mm
DS593_02_021908
3