Available Software Packages - Mitsubishi Electric MELSEC iQ-R Series User Manual

5.2

Available Software Packages

An engineering tool and a configuration tool are required to configure the RJ71PB91V.
Item
Engineering tool
Configuration tool
Profile of the RJ71PB91V
Profile is data that is registered to GX Works3 and contains information of connected devices (such as model names).
Profile varies depending on the station type of the RJ71PB91V.
Model name displayed on GX
Works3
RJ71PB91V
RJ71PB91V(S)
If GX Works3 is installed or upgraded in the system having PROFIBUS Configuration Tool, the parameters of
the RJ71PB91V may not be configured properly.
In such a case, uninstall PROFIBUS Configuration Tool  install or upgrade GX Works3  install PROFIBUS
Configuration Tool again.
Software
GX Works3
PROFIBUS Configuration Tool
Profile registration
Registered to GX Works3 at the time of installation of PROFIBUS Configuration Tool.
Registered at the time of installation of the supported versions of GX Works3.
Supported version Setting
Version 1.042U or later When operating as the DP-Master
Version 1.045X or later When operating as the DP-Slave
Version 1.047Z or later
1.00A or later When operating as the DP-Master
1.01B or later
5 SYSTEM CONFIGURATION
5.2 Available Software Packages
• When configuring the redundant
system
• When using with the Safety CPU
• When using with the SIL2 Process
CPU
• When configuring the redundant
system
• When using with the Safety CPU
• When using with the SIL2 Process
CPU
Station
type
DP-Master
DP-Slave
5
31