Compatibility - Panasonic SF2B Series Instruction Manual

Light curtain / type2
Hide thumbs Also See for SF2B Series:
Table of Contents

Advertisement

3-6 Compatibility

This function is used to replace other series of light curtains or area sensors with this device.
The type of bottom cap cable and sensor mounting bracket varies depending on the series to
be replaced.
<Replacement of SF2-A series>
Designation
Bottom cap cable
Sensor mounting bracket
Connect the shielded line to +V in the NPN output type. Connect the shielded line to 0V in the
PNP output type.
The connecting cable SF2N-CC□ (optional) can be used without change.
<Replacement of SF2-N series>
Designation
Bottom cap cable
Sensor mounting bracket
Connect the shielded line to +V in the NPN output type. Connect the shielded line to 0V in the
PNP output type.
The connecting cable SF2N-CC□ (optional) can be used without change.
Note that the interference prevention function (parallel connection) becomes unusable.
<Replacement of NA40 series>
Designation
Bottom cap cable
Sensor mounting bracket MS-SF2B-4 for MS-NA40-1, MS-SF2B-6 for direct mounting
The control output (OSSD 2) is provided instead of self-diagnosis output. Note that the self-
diagnosis output becomes unusable.
With the connecting cable NA40-CC□ (optional) for NA40 series, the emission halt function is
unusable because the emission cable has only three cores. Additionally, note that the operating
ambient temperature range of NA40-CC□ (optional) for NA40 series is from -10 to +50°C.
Be sure to use both OSSD 1 and OSSD 2 as control outputs.
<Replacement of SF1-N series>
Designation
Bottom cap cable
Sensor mounting bracket MS-SF2B-4 for MS-SF1-1, MS-SF2B-7 for direct mounting
The connecting cable SF1-CC□A (optional) can be used without change.
The interference prevention line and control output (OSSD 1) are respectively provided instead
of the synchronization wire on the emitter and that on the receiver.
Refer to "2-5 Wiring" for details of the connecting method.
Be sure to use both OSSD 1 and OSSD 2 as control outputs.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com
Model No.
SF2B-CB05-A
MS-SF2B-5
Model No.
SF2B-CB05-A
MS-SF2B-5
Model No.
SF2B-CB05-B
Model No.
SF2B-CB05-B
61

Advertisement

Table of Contents
loading

Table of Contents