Panasonic SF2B Series Instruction Manual page 55

Setting procedure and
check items
Wiring synchronization
using 8-core cable
Open the emission
halt input
Receiver's control
output (OSSD 1 / 2)is
OFF
(Emission halt)
(Normal operation)
3
Beam synchronization
using 4-core cable
Connect the emis-
sion halt input to 0V
or +V
Receiver's control
output (OSSD 1 / 2)
is OFF
(Emission halt)
(Normal operation)
Wiring synchronization
using 8-core cable
Connect the emis-
sion halt input to 0V
or +V
Receiver's control
output (OSSD 1 / 2)
is ON
(Normal operation)
4
Beam synchronization
using 4-core cable
Open the emission
halt input
Receiver's control
output (OSSD 1 / 2)
is ON
(Normal operation)
Note: The status of the setting indicators (red) of the emitter and the digital error indicators of the receiver shown
above is when the frequency selector is set to "2". Only one of the setting indicators of the emitter lights up
and only the middle bar of the digital error indicators of the receiver lights up in red when the selector is set
to "1". (This is not an error.)
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com
: Lights up in red, : Lights up in green,
Indicators
Emitter
Beam-axis alignment
indicator
Operation indicator (Red)
Emission halt indicator
(Orange)
Fault indicator
Setting indicator
Beam-axis alignment
indicator
Operation indicator (Green)
Emission halt indicator
(Orange)
Fault indicator
Setting indicator (Red) (Note)
Beam-axis alignment
indicator (Green)
Operation indicator (Green)
Emission halt indicator
Fault indicator
Setting indicator
Beam-axis alignment
indicator
Operation indicator (Green)
Emission halt indicator
Fault indicator
Setting indicator (Red) (Note)
: Lights up in orange,
Receiver
Beam-axis alignment
indicator
OSSD indicator (Red)
Incident light intensity indicator
Fault indicator
Digital error indicator
Beam-axis alignment
indicator
OSSD indicator (Red)
Incident light intensity indicator
Fault indicator
Digital error indicator
(Red) (Note)
Beam-axis alignment
indicator (Green)
OSSD indicator (Green)
Incident light intensity indicator
(Green)
Fault indicator
Digital error indicator
Beam-axis alignment
indicator
OSSD indicator (Green)
Incident light intensity indicator
(Green)
Fault indicator
Digital error indicator
(Red) (Note)
: Turns OFF
Control output
OSSD 1 OSSD 2
OFF
ON
55