Advertisement
PIM Menu Description
Check the RS485 Circuit of PIM itself for Test or Service
f You can check if the RS485 circuit is normal when you have doubt the main board .
f
f Before checking, connect COM1 and COM2 terminal with wire as you see the right figure .
f
1 . Access to main menu by pressing the [Menu] button from the normal display .
Then select '3 . Check' by pressing the [], [] buttons, and press the [Set] button .
Main Menu
3.Check
2 . Select '3 . 2 COM'Check' by pressing the [], [] buttons and then press the [Set] button .
- Inspect the packet transmission/reception status with DMS .
3.Check
3.2 COM' Check
3 . Communication inspection result will be displayed . (OK/NG)
COM' Check End
OK
4 . After the inspection, press the [Menu] button to move to upper menu or cancel the setting .
- All menus will return to the normal display if there is no input for 1 minute .
COM' Check Start
Checking...
English-30
Advertisement
