Advertisement
PIM Menu Description
Monitoring Menu
Address
1 . Access to main menu by pressing the [Menu] button from the normal display . Then select '1 . M onitoring' by pressing the
[Set] button .
Main Menu
1.Monitoring
2 . To check the Address, press the [Set] button when '1 . 1 Address' appears .
1.Monitoring
1.1 Address
"58 30 ff" is an example. It is subject to change according to the setting.
• Make sure to reset the PIM after changing the rotary switch .
NOTE
• First byte represents PIM (58), second byte represents assigned address (between 30~3F) and last byte is
fixed to FF .
3 . After checking, press the [Menu] button to move to upper menu or cancel the setting .
- All menus will return to the normal display if there is no input for 1 minute .
Option Switch(for monitoring only)
1 . Access to main menu by pressing the [Menu] button from the normal display . Then select '1 . M onitoring' by pressing the
[Set] button .
1.Monitoring
1.2 Option S/W
2 . Move to '1 . 2 Option S/W' menu by pressing the [], [] buttons, then select it by pressing the [Set] button .
1.2 Option S/W
1X
Example display : 1X
• Option switch 1 : On
NOTE
• Option switch 2 : Off
3 . After the checking, press the [Menu] button to move to upper menu or cancel the setting .
- All menus will return to the normal display if there is no input for 1 minute .
1.1 Address
58 30 FF
English-18
Advertisement
