Advertisement
Safety Precautions
This installation manual describes how to install the PIM . For installation of other optional accessories, refer to the appropriate
installation manual .
WARNING
CAUTION
WARNING
f Read carefully this installation manual before installation and check if the PIM is installed correctly after installation .
f
f Do not attempt to install or repair this PIM by yourself .
f
f This PIM contains no user-serviceable parts .
f
Always consult authorized service personnel for repairs .
f When moving, consult authorized service personnel for disconnection and installation of the PIM .
f
f Ensure that the wall is strong enough to support the weight of the PIM .
f
f Must install the PIM with rated power supply .
f
f The PIM must be installed according to the national electrical rules by an installation specialist .
f
f If you wish to uninstall the PIM, consult an authorized installation center .
f
CAUTION
f Do not use inflammable gases near the PIM .
f
f Do not install the PIM in a location where it will come into contact with combustible gases, machine oil, sulphide gas, etc .
f
f Avoid locations where acid/alkali solution or special spray is used .
f
f Choose a location that is dry and sunny, but not exposed to direct sunlight . Suitable temperature is between 0°C(32°F)
f
and 39°C(102 . 2 °F) .
f Do not spill water into the PIM .
f
f Do not apply tensile strength to the cable to avoid cable damage .
f
f Do not press the buttons with a sharp object .
f
f Do not connect the power cable to the control terminal .
f
f If the PIM is installed in a hospital or other special places, it should not affect other electronic devices .
f
Hazards or unsafe practices that may result in severe personal injury or death.
Hazards or unsafe practices that may result in minor personal injury or property damage.
English-3
Advertisement
