Advertisement
PIM Menu Description
Setting the Meter Type
f You can set the meter type .
f
1 . Access to main menu by pressing the [Menu] button from the normal display . Then select '2 . C onfiguration' by pressing
the [], [] buttons, and press the [Set] button .
Main Menu
2.Configuration
2 . Enter the password using the [], [] buttons and press the [Set] button .
- The default password is '0000' .
Enter your P/W
0:0:0:0
3 . Select '2 . 2 Meter Type' by pressing the [], [] buttons and then press the [Set] button .
2.Configuratuion
2.2 Meter Type
4 . Move to the channel you want to set by pressing the [], [] buttons, and then press the [Set] button .
- You can select each channel or all channel altogether .
2.2 Meter Type
CH1:Power Meter
5 . Modify the meter type by pressing the [], [] buttons .
- Dafult value: Power Meter
- Type: Power Meter, Gas meter, Water Meter
- To apply same type of the meter to all channels at once, select 'ALL Channel' in step 4 .
Set CH1 Meter
CH1:Power Meter
6 . Press the [Set] button to save the setting .
7 . After the setting, press the [Menu] button to move to upper menu or cancel the setting .
- All menus will return to the normal display if there is no input for 1 minute .
English-22
Advertisement
