Mitsubishi Electric GOT1000 Series User Manual page 4

[INSTALLATION PRECAUTIONS]
 Use this unit in the environment given in the general specifications of the
GT15 User's Manual.
Not doing so can cause an electric shock, fire, malfunction or product damage
or deterioration.
 When installing this unit to the GOT, fit it to the connection interface of the
GOT and tighten the mounting screws in the specified torque range.
Undertightening can cause a drop, failure or malfunction.
Overtightening can cause a drop, failure or malfunction due to screw or unit
damage.
[WIRING PRECAUTIONS]
 Be sure to shut off all phases of the external power supply used by the system
before wiring.
Not doing so can cause an electric shock, product damage or misoperation.
 When switching power on or starting operation after mounting, wiring or other
work, always fit the terminal cover supplied to the product.
Not doing so can cause an electric shock, short circuit or failure.
 Always ground the FG terminal of the GOT power supply and the FG1 termial
of this unit to the protective ground conducter.
Be sure to ground the GOT and this unit separately.
Not doing so may cause an electric shock or misoperation.
 Before wiring the unit, confirm the rated voltage and terminal arrangement of
the product.
A fire or failure can occur if the power supply connected is different from the
rating or wiring is incorrect.
 Use applicable solderless terminals and tighten them with the specified
torque. If any solderless spade terminal is used, it may be disconnected when
the terminal screw comes loose, resulting in failure.
CAUTION
WARNING
CAUTION
A-3