Before Operating; Check Tire Pressure; Adjust Operating Height - Toro 07081 Operator's Manual

Before Operating

Note: Determine the left and right sides of the machine
from the normal operating position.

Check Tire Pressure

The correct tire pressure for the castor wheels is 30 psi.

Adjust Operating Height

1. Remove the clevis pin from the spindle shaft (Fig. 5).
1
2
Figure 5
1. Clevis pin
2. Spacer
2
3
3. Caster arm
2. Remove or add "C" shaped spacers to the spindle shaft,
below the castor arm, to get the desired height.
3. Place all remaining spacers on the spindle shaft above
the caster arm.
4. Install the clevis pin to secure the assembly.
5. Ensure that all four castor wheels are set at the same
height.
7