Table of Contents
Advertisement
Specifications
General Specifications
General Description
Main Frame
Support
Finger Rotor
Motor
Drive
Deck Width
Deck Height
Weight
Note: Specifications and design subject to change without notice.
The Finger Deck is used with the Toro Versa Vac. The primary function is to
facilitate debris removal from large turf areas.
One piece–welded frame of 10 and 12 gauge formed steel.
Four casters with adjustable height
Six 1/2 inch spacers per caster (3 inch of adjustment by 1/2 inch intervals).
Four pneumatic 4.1 – 4 NHS 2–ply tires.
One piece welded base weldment.
1 inch diameter shaft inside of a 2 in square tube with 3/16 wall.
88 rubber fingers 6 in long.
Operates @ 1100 rpm ± 100 rpm.
Hydraulic gear motor .9 CID, with over hung load package.
Belt drive from motor to rotor shaft (3–3vx).
Drive ratio: 1.3 : 1
Love Joy torsion type belt tensioner with stabilizer bracket.
78 inch ± 2 inch over all (72 inch operating width)
20 inch ± 4 inch
283 lb. ± 25 lb.
5
Advertisement
Table of Contents
