Installing The Rack-Mounted Device - Siemens SIPROCESS GA700 Quick Start Manual
Continuous gas analysis
Hide thumbs
Also See for SIPROCESS GA700:
- Operating manual (306 pages) ,
- Compact operating instructions (244 pages) ,
- Operating instructions manual (224 pages)
Table of Contents
Advertisement
5.3.2
Installing the rack-mounted device
Dimension drawing
The following figure shows the dimensions of the rack-mounted device and the distance of
the fastening holes at the mounting brackets. The dimensions are specified in millimeters.
Figure 5-1 Dimension drawing
Procedure
1. Place the rack unit in the control cabinet or the enclosure.
2. Fasten the rack-mounted device in the control cabinet or enclosure with four screws at its
mounting brackets.
The dimensions for the drill holes are specified in the dimension drawing.
Note
As an option, you can place the rack-mounted device on a guide bracket or floor panel in a
rack or cabinet.
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
Installing
5.3 Rack-mounted device
35
Advertisement
Table of Contents
