Application Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.4

Application Settings

Set the supplementary cyclic settings, interrupt settings, or other parameters for the RJ71LP21-25.
: Can be set, : Cannot be set
Item
Supplementary Cyclic
Settings
Interrupt Settings
Transient Transmission
Group No.
Dynamic Routing
Parameter Name
Event Reception from Other
Stations
Module Operation Mode
Interlink Transmission
Settings
Redundant System Settings
2 PARAMETER SETTINGS
64
2.4 Application Settings
Description
Set the data link monitoring time and system switching monitoring time.
Set conditions for sending an interrupt request to the CPU module.
Set a group number for transient transmission with group specification.
Select whether to enable the dynamic routing function.
Set a name for the module parameter arbitrarily.
Select whether to obtain the events occurring in the other stations.
Set the operation mode of the RJ71LP21-25.
Set link device ranges when cyclic data are transferred from a station in
the own network to a station in another network.
Set the operation mode for the RJ71LP21-25 mounted on system B in a
redundant system.
This item can be set only when "RJ71LP21-25(R)" is selected for the
module model name.
Availability Reference
Control Normal
station station
  Page 65
Supplementary
Cyclic Settings
 
Page 66 Interrupt
Settings
 
Page 72 Transient
Transmission
Group No.
 
Page 72 Dynamic
Routing
 
Page 72 Parameter
Name
  Page 72 Event
Reception from
Other Stations
 
Page 73 Module
Operation Mode
 
Page 74 Interlink
Transmission
Settings
 
Page 78 Redundant
System Settings