List Of Parameter Numbers - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.6

List of Parameter Numbers

This section lists the parameter numbers displayed in the module diagnostics.
If a parameter number is displayed when an incorrect parameter is set, the target parameter can be identified.
Parameter numbers are displayed in "Detailed Information" in the [Error Information] tab under the "Module Diagnostics"
window of the RJ71LP21-25. (Page 92 Error information)
Item
Required Settings
Basic Settings
Application Settings
Others
4 TROUBLESHOOTING
140
4.6 List of Parameter Numbers
Station Type
Network No.
Station No.
Network Range Assignment
Operation after Reconnection
Transmission Speed
Link Refresh Settings
Supplementary Cyclic Settings
Low Speed Cyclic Setting
Interrupt Settings
Transient Transmission Group No.
Dynamic Routing
Parameter Name
Event Reception from Other Stations
Module Operation Mode
Redundant System Settings
Interlink Transmission Parameters
Station Type
Network No.
Station No.
Total No. of Stations
LB/LW Setting
LX/LY(1) Setting
LX/LY(2) Setting
I/O Master Station
Reserved Station
Pairing
Operation after Reconnection
Transmission Speed
SB
SW
LB/LW/LX/LY setting (1 to 64)
Data Link Monitoring Time
System Switching Monitoring Time
Constant Link Scan Time
Maximum No. of Returns to System Stations in 1
Scan
Control Station Shift Setting
Block send data assurance per station
Block receive data assurance per station
Maximum No. of Transient Transmissions
Maximum No. of Transient in One Station
Low Speed Cyclic Setting
Fixed Interval Cycle Setting
System Timer Setting (1 to 8)
Module Operation Mode (System B)
Parameter No.
7100H/7110H/7700H
7100H/7110H
7100H/7110H
A06EH
A06EH
A06EH
A06EH
A06EH
A06EH
A06EH
7100H/7110H
7100H/7110H
7401H
7401H
7401H
A06EH
A06EH
A06EH
A06EH
A06EH
A06EH
A06EH
A06EH
A06EH
A06FH
A06FH
A06FH
A07FH/A015H/7800H
7100H/7110H
A07FH
7310H/7311H
A07FH
7100H/7110H
7110H
7500H