Interlink Transmission Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

Interlink Transmission Settings

Set link device ranges when cyclic data are transferred from a station in the own network to a station in another network.
Setting method
The procedure for the interlink transmission settings is shown below.
1.
Select combination of modules in the "Transfer Source Module" and "Transfer Destination Module" boxes and enter
setting values.
2.
Click the [OK] button to finish the interlink transmission settings.
Setting items
Item
Setting Method
Transfer Source Module
Transfer Destination Module
LB/RY Source
RX/LB
Destination
2 PARAMETER SETTINGS
74
2.4 Application Settings
Description
Select a link device assignment method.
• Start/End: Enter the start and end numbers of link devices.
• Points/Start: Enter the points and start numbers of link devices.
Select the transfer source and destination modules.
Enter the link device range of the transfer source and destination modules.
Up to 64 ranges can be set. LB points can be assigned in increments of 16 (Start:
0H, End: FH).
When the transfer source is
the RJ71LP21-25
Network
RJ71LP21-25
module
Start Start
No.1
·
LB RY
End End
Start Start
No.2
·
LB RY
End End
·
· ·
Start Start
No.64
·
LB RY
End End
When the transfer destination is
the RJ71LP21-25
Network
RJ71LP21-25
module
Start
No.1
· ·
RX LB
End
Start
No.2
· ·
RX LB
End
·
· ·
Start
No.64
· ·
RX LB
End
Setting range
• Start/End
• Points/Start
Default: Start/End
The setting varies depending on
the set module.
LB
Points: 16 to 16384
Range: 0H to 3FFFH
(Default: Blank)
Start
·
End
Start
·
End
Start
·
End