Toro GrandStand 74527 Operator's Manual page 31

Multi force
Table of Contents

Advertisement

Figure 36
Changing the Engine Oil
Service Interval: After the first 8 hours
Every 100 hours
Note:
Dispose of the used oil at a recycling center.
1.
Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil
drains completely.
g193347
2.
Disengage the PTO, move the motion-control
levers to the N
engage the parking brake.
3.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4.
Change the engine oil as shown in
g194611
31
-
position, and
EUTRAL
LOCK
Figure
37.

Advertisement

Table of Contents
loading

Table of Contents