Installation
Secure the wine conditioning unit in
the niche
The wine conditioning unit must
stand proud of furniture doors evenly
by 2 mm.
Open the appliance door.
Remove cover , and first screw the
wine conditioning unit to the adjacent
furniture unit at the top left .
The wine conditioning unit will align it-
self to the left side of the niche. The
front of the appliance door must be
flush with the furniture front.
Refit the cover .
72
Screw the wine conditioning unit at
the bottom left and right to adjacent
furniture units.
If necessary a fourth screw can be
used in the top right hand hinge to
secure the wine conditioning unit.
To do so dismantle the door and then
fit this extra screw.
Close the appliance door and check
that the side edges of the appliance
door are aligned with the side walls of
the wine conditioning unit.
Now connect the wine conditioning
unit to the electrical supply.