Switching On And Off; Before Using For The First Time; Operating The Wine Conditioning Unit; Switching The Wine Conditioning Unit On - Miele KWT 6312 UGS Operating And Installation Instructions

Switching on and off

Before using for the first time

Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil (depending on model)
Stainless steel surfaces have a layer of
protective foil to prevent scratching dur-
ing transportation.
 Do not remove the foil until the wine
conditioning unit has been installed in
its final location. Start at one of the
top corners.
Cleaning the wine unit
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.
22
Operating the wine condition-
ing unit
A light touch of the finger on the
sensors is all that is required to operate
this wine conditioning unit.
Every touch of a sensor is confirmed
with an audible tone. This tone can be
switched off (see "Selecting further set-
tings" – "Audible tones ").
Switching the wine conditioning unit
on
When the wine conditioning unit is con-
nected to the electrical supply, the
mains connection symbol  will ap-
pear in the display after a short while.
 Touch the On/Off sensor.
The mains connection symbol  will
go out and the wine conditioning unit
will start to cool.
The first time the appliance is switched
on, the alarm symbol  will flash until
the selected temperature has been
reached.
The interior lighting will come on when
the door is opened.