Table of Contents
Advertisement
Appendix: Requirements on Third-Party Cabinets
If the cabinets are third-party cabinets, they must meet the following requirements:
The cabinets must be 19-inch standard cabinets, with a depth larger than 800 mm and a spacing of 465 mm between the
mounting holes on the left and right sides.
The spacing between the mounting rails and the outer side of the cabinet door must be larger than 150 mm, the door thickness
must be smaller than 25 mm, and the spacing between the mounting rails and the door must be larger than 125 mm.
The cabinets can be accessed from both the front and rear doors and the porosity of the doors must be greater than 50%.
The cabinets must have necessary accessories, such as guide rails, floating nuts, and bolts.
Determine the cable outlet locations based on the cable routing scheme.
≥800mm
Cabinet rear
Cabinet front
L2 L3
L1
L1＞150mm
L2＞125mm
L3≥25mm
Cabinet door thickness < 25 mm
Porosity of the front and rear doors > 50%
16
465mm
Advertisement
Table of Contents
