Yamaha CC-50 Owner's Manual page 39

OTHER RECORDINGS
Receiver
Tape Deck
2 4
4 4 3, 3 3
TUNER DIRECT
1 2
1 2
6 7
6 7
4 4
A B
TIME PROG TAPE
STOP
REPEAT PRESET
DOWN
RANDOM PLAY STOP
DECK REC/PAUSE
A/B
EFFECT LEVEL DSP
- +
POWER SLEEP DISPLAY
4 4
1, 2 2
2, 1 1
4 4 4 4
3 4 5
3 4 5
8
8 9 0
C D E 4 4
+
EDIT I0
PLAY/PAUSE CD
A/B/C/D/E TUNER
UP
PLAY
TAPE
PHONO/AUX 1, 2 2
MODE SP/PHONES
VOLUME
+
-
Dubbing
•
During dubbing, adjusting the VOLUME, BALANCE,
TREBLE and BASS controls have no effect on the
recorded sound.
If, however, the DSP is on, the DSP effect is recorded
along with the source.
* Music with DSP effect is suitable for listening to inside
a car etc.
•
Try to use the same tape formula and length for the
recording tape as for the master tape.
1
Select the tape deck so that "TAPE" appears on the
display by pressing the INPUT selector
2
Load a prerecorded tape into the DECK A cassette
compartment. Insert a blank tape into the DECK B
cassette compartment.
3
Set the reverse mode switch to
side, or to (or
sides.
4
Press the DUBBING button.
* Press "NORMAL" to dub at normal speed, and "HIGH"
to dub at about twice the normal speed.
* Dubbing will begin from side A regardless of the side
now selected.
To stop dubbing
Press the stop button.
* Tape A and tape B will stop at the same time.
Note
Only tapes originally encoded with Dolby B or C NR will be
dubbed onto tapes with Dolby B or C NR encoding.
The Dolby NR switch will have no effect on the recording of
tape B during dubbing.
However, the playback tonal quality of tape A will change
according to the Dolby NR switch position.
Erasing recorded tapes
1 1
Load the tape to be erased into the DECK B cassette
compartment.
2 2
Select the tape deck so that "TAPE" appears on the
display by pressing the INPUT selector
3 3
Set the reverse mode switch to
side and to (or
erase both sides.
4 4
Press the REC/PAUSE button, then press the play
button to erase side A of the tape, or the play
erase side B.
E-37
or button.
to record on only one
) for continuous recording on both
or button.
to erase only one
) to
button to