Program Play - Yamaha CC-50 Owner's Manual

COMPACT DISC PLAYER OPERATION
CD Player
TUNER DIRECT
1 2 3
1 2 3
6 7 8
6 7 8
A B C
TIME PROG TAPE
STOP
2
REPEAT PRESET
DOWN UP
RANDOM PLAY STOP
DECK REC/PAUSE
A/B
EFFECT LEVEL DSP
+
-
POWER SLEEP DISPLAY
Display information during programming
TRACK
HA L L
O N D S P
1 2 3 4 5 6 7 8 9 10 11 12
Selected track number
Selected disc
TRACK
HA L L
O N D S P
1 2 3 4 5 6 7 8 9 10 11 12
6 1
4 5
4 5
3
9 0
D E
+
EDIT I0
PLAY/PAUSE CD
A/B/C/D/E TUNER
5
PLAY
TAPE
PHONO/AUX
MODE SP/PHONES
VOLUME
- +
PROG
Playback order
Total playing time
TOTAL
PROG
Music calendar

Program play

You can program up to 20 tracks in any desired order.
1
Load a disc and close the disc table.
2
When in the stop mode, press the PROGRAM button to
prepare for programming.
* "PROG" and "P-01" illuminate on the display, and all
track numbers on the disc begin flashing.
3
Use the track number input buttons to select the desired
track number.
* The selected track number and the total play time of
the programmed tracks will illuminate on the display,
and soon it is replaced by the display of the next
playback order. Programmed track numbers will stop
flashing and illuminate on the music calendar.
* Pressing the TIME button displays the total play time of
the programmed tracks for about 1 second, and then it
is replaced by the display of the next playback order.
* For example, to choose selection 12
(1) Press the "+10" button.
(2) Press the "2" button.
4
Repeat step 3 for any other track. Up to 20 tracks can be
programmed.
5
Press the play/pause button to start playback of
programmed tracks.
Notes
•
It is also possible to program a sequence of tracks while
looking at the list of tracks on the surface of the disc
before closing the disc table.
•
During playback or pause, programming is not possible.
•
If the total time of the programmed tracks reaches 100
minutes or more, only the last two-digits will be displayed
for the three-digit number.
•
The total time of the programmed tracks will not be
displayed, if a track number higher than 19 is
programmed.
•
Skip search can be performed during playing back, but
only within the range of the programmed tracks.
•
Manual search can be performed during playing back to
search through all tracks, including unprogrammed tracks.
E-19