Sound Control; Digital Sound Field Processor (Dsp) Control - Yamaha CC-50 Owner's Manual

SOUND CONTROL

VOLUME
0 I0
BALANCE
L
BASS
– +

DIGITAL SOUND FIELD PROCESSOR (DSP) CONTROL

HALL
DISCO
CHURCH
JAZZ CLUB
VOLUME
+
-
R
TREBLE
– +
MODE
Volume
Front panel operation
Rotate the VOLUME control towards 10 to increase the
volume, and towards 0 to decrease the volume.
Remote control operation
Press the VOLUME + button to increase the volume and the
VOLUME – button to decrease the volume.
Balance
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused from
the speaker settings or the listening room condition.
Turn this clockwise to emphasize the right and
counterclockwise for the left.
Tone
BASS : Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
The Digital Sound Field Processor (DSP) built into this unit
presents you with the ambience of an actual concert hall,
jazz club, etc. by adding effects as sonic reflections or
reberverations that create the sound environment of a hall
etc.
This unit provides the following 4 DSP modes that simulates
actual sound environments.
Mode
HALL This mode is suitable for reproducing live
recordings of pop or rock music including
vocals.
You can obtain sound expansion and
reverberations of a hall by this mode.
DISCO You can enjoy an atmosphere of disco with
lively bass and powerful sound field.
CHURCH This mode creates a rich sound field of
church with long reverberations.
It is suitable for vocals etc.
JAZZ CLUB This mode creates a sound field with much
presence adding spatial effect as if music
instruments are coming in front.
E-14
Feature