Mitsubishi Electric FR-A800 Series Beginner's Manual page 9

Additional instructions
Also note the following points to prevent an accidental failure, injury, electric shock, etc.
Transportation and installation
CAUTION:
E
● Any person who is opening a package using a sharp object, such as a knife and cutter, must
wear gloves to prevent injuries caused by the edge of the sharp object.
● When carrying products, use correct lifting gear to prevent injury.
● Do not stack the inverter boxes higher than the number recommended.
● During installation, caution must be taken not to drop the inverter as doing so may cause
injuries.
● Ensure that installation position and material can withstand the weight of the inverter.
Install according to the information in the instruction manual.
● Do not install the product on a hot surface.
● The inverter must be installed on a strong surface securely with screws so that it will not drop.
● Do not install or operate the inverter if it is damaged or has parts missing. This can result in
breakdowns.
● When carrying the inverter, do not hold it by the front cover or setting dial; it may fall off or
fail.
● Do not stand or rest heavy objects on the product.Check the inverter mounting orientation
is correct
● Prevent other conductive bodies such as screws and metal fragments or other flammable
substance such as oil from entering the inverter.
● As the inverter is a precision instrument, do not drop or subject it to impact.
● Use the inverter under the environmental conditions mentioned in chapter 1. Otherwise, the
inverter may be damaged.
● If halogen-based materials (fluorine, chlorine, bromine, iodine, etc.) infiltrate into a Mitsub-
ishi product, the product will be damaged. Halogen-based materials are often included in
fumigant, which is used to sterilize or disinfect wooden packages. When packaging, prevent
residual fumigant components from being infiltrated into Mitsubishi products, or use an
alternative sterilization or disinfection method (heat disinfection, etc.) for packaging. Ster-
ilization of disinfection of wooden package should also be performed before packaging the
product.
● To prevent a failure, do not use the inverter with a part or material containing halogen flame
retardant including bromine.
Frequency Inverters - Beginner's Guide V