Removal And Reinstallation Of The - Mitsubishi Electric 800 Series Instruction Manual

2.2
Removal and reinstallation of the front cover
 Removal of the front cover
• Example of the FR-E860-0017(0.75K)
(a)
Loosen Loosen Loosen
(a) Loosen the screw on the front cover. (This screw cannot be removed.)
(b)
Pull out the cover using its lower side as a support.
(c)
With the cover removed, the control circuit terminals can be wired and the plug-in option can be installed.
 Reinstallation of the front cover
• Example of the FR-E860-0017(0.75K)
(a)
Rear of the cover Rear of the cover Rear of the cover
Hooks Hooks Hooks
(a) Check the position of the hooks on the rear of the cover.
(b) Insert the hooks of the cover into the sockets of the wiring cover, and reinstall the cover to the inverter.
(c)
Tighten the mounting screw of the front cover. (Tightening torque: 0.6 to 0.8 N·m)
(b)
(b)
(c)
(c)
Hooks Hooks Hooks
本体 Sockets of the wiring cover Sockets of the wiring cover Sockets of the wiring cover
2. Installation and Wiring
2.2 Removal and reinstallation of the front cover
1
2
3
4
5
6
7
8
9
10
Fasten Fasten Fasten
25