GE AF-650 GP Design And Installation Manual page 47

About Programming
4. AN-10 Terminal 53 Low Voltage. Set minimum
external voltage reference on Terminal 53 at 0 V.
(This sets the minimum input signal at 0 V.)
5
5
Figure 5.4
5. AN-11 Terminal 53 High Voltage. Set maximum
external voltage reference on Terminal 53 at 10 V.
(This sets the maximum input signal at 10 V.)
Figure 5.5
5-2
TM
AF-650 GP Design and Installation Guide
6.
Figure 5.6
7.
Figure 5.7
DET-767A
AN-14 Terminal 53 Low Ref./Feedb. Value. Set
minimum speed reference on Terminal 53 at 20
Hz. (This tells the adjustable frequency drive that
the minimum voltage received on Terminal 53 (0
V) equals 20 Hz output.)
AN-15 Terminal 53 High Ref./Feedb. Value. Set
maximum speed reference on Terminal 53 at 50
Hz. (This tells the adjustable frequency drive that
the maximum voltage received on Terminal 53
(10 V) equals 50 Hz output.)