Installation Of Line Power Shield For Adjustable Frequency Drives; Usb Extension Kit; Installation Of 4X Or 5X Load Share Option - GE AF-650 GP Design And Installation Manual

Installation
2 2
Figure 2.10 Drive on pedestal
There is one pedestal that fits both Unit Sizes 41 and 42.
The pedestal is standard for Unit Size 51.
Ordering information
Unit size 41/42: OPC4XPED
Figure 2.11 Mount the drive onto pedestal.
2-6
TM
AF-650 GP Design and Installation Guide
2.4.7 Installation of Line Power Shield for
Adjustable Frequency Drives
This section is for the installation of a line power shield for
the adjustable frequency drive series with Unit Sizes 41, 42
and 51. It is not possible to install in the IP00/ chassis drive
types as these have included as standard a metal cover.
These shields satisfy VBG-4 requirements.
NOTE!
For further information, please consult GE.

2.4.8 USB Extension Kit

A USB extension cable can be installed into the door of
unit size 6x adjustable frequency drives.
Ordering information
Unit size 1x through 5x: OPCUSB
Unit size 6x: OPCUSB6X
2.4.9 Installation of 4x or 5x Load Share
Option
The load share option can be installed on unit sizes 41, 42,
43, 44, 51 and 52.
Ordering information
Unit size 41/43: OPCLSK41
Unit size 42/44: OPCLSK42
Unit size 51/52: OPCLSK51 for 460 VAC
OPCLSK52 for 575 VAC
The drive can be purchased with the factory-installed
brake chopper which includes load share terminals as
factory installed.
DET-767A