3.1 Diagnosis Operating Area
3.1
Diagnosis Operating Area
3.1.1
3.1.2
INFO
Alarms/ Messages
The overview of alarms or messages, which are currently issued, can be displayed by
pressing [Alarms] (HSK1) or [Messages] (HSK2) soft key in Diagnosis Operating Area.
For further information about these screens, please refer to
Machining Center" (NCSIE-SP02-25) or
(6FC5398-2AP10-0BA0).
Alarm help
The help information about the alarm, that is currently displayed and selected, can be
displayed by pressing
information is the electrical documentation of
information shows meaning and remedy of the alarm.
The help information may not be prepared for some alarms, because they are supplemented by
machine manufacture and not described in Diagnostics guide. For explanation of such alarms, please
refer to the document published by machine tool builder or inquire machine tool builder.
SINUMERIK Operator's Guide HMI Advanced"
"
Information key"
in the alarm overview screen. The displayed
"
i
Help
Diagnostics guide" (NCSI-ZZ02-03). The
"
3-2
Operating Manual for
"