2.3.8
Base-dimension/adapter-dimension tool length compensation (tool parameters 21
to 23)
Meaning
Tool base dimension/adapter dimension can be used when the reference point of the
toolholder (tool size) differs from the reference point of the toolholder.
This is the case when:
• The tool and the tool adapter are measured separately but are installed on the machine in
• The tool is used in a second tool fixture located in another position (e.g., vertical and
• The tool fixtures of a tool turret are located at different positions.
Figure 2-11
Basic logic functions: Tool Offset (W1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
one unit (the tool size and adapter size are entered separately in a cutting edge).
horizontal spindle).
Example applications for base-dimension/adapter-dimension TLC
Detailed Description
2.3 Tool cutting edge
47