3.
Select the include folder for the C Controller module in the "Select directory" screen, and click the [OK] button.
In this procedure, the include file is stored in "C:\MELSEC\R12CCPU-V".
4.
Check that the selected folder is specified in the "Add include search path to selected build spec" screen, and click the
[OK] button.
5.
Check that the added include path is displayed in "Include paths", and click the [OK] button.
6.
If the following message appears after clicking the [OK] button, click the [Yes] button.
2 USING C CONTROLLER MODULE
32
2.5 Programming