Front Cowl Installation - Husqvarna HUV 4214 2009 Maintenance And Service Manual

BODY AND TRIM
1139
Figure 4-11 Front Cowl Removal – disengage cowl from
fender grooves
8. Grip cowl, lift and disengage edges of cowl from fender grooves (Figure 4-11, Page 4-9).
1140
Figure 4-12 Front Cowl Removal – lift off cowl
9. Lift off cowl and remove from vehicle (Figure 4-12, Page 4-9).

FRONT COWL INSTALLATION

1. Front cowl installation is reverse of cowl removal.
2. Tighten fascia mounting frame bolts to 11 ft-lb (15 N·m).
3. Tighten front fascia bolts to 22 in-lb (2.5 N·m).
4. Tighten lower corner of the fascia torx-head screws to 22 in-lb (2.5 N·m).
2009-2010 HUV 4214, HUV 4414, and HUV 4414X Maintenance and Service Manual
4
Front Body
Page 4-9