Husqvarna HUV 4214 2009 Maintenance And Service Manual page 23

GENERAL INFORMATION
5. Connect the end of the first cable to the positive (+) terminal of the booster battery. Connect the other end of the
same cable to the positive (+) terminal of the solenoid (Figure 3-6, Page 3-7).
6. Connect the end of the second cable to the negative (-) terminal of the booster battery. Connect the other end of
the same cable to the negative (-) terminal of the disabled vehicle battery (Figure 3-7, Page 3-7).
7. Start the engine. After the engine has started, remove the cable from the negative (-) terminal of the disabled
vehicle battery first. Next, remove the other end of the cable from the negative (-) terminal of the booster battery.
Then, remove the cable from the positive (+) terminal of the solenoid followed by the other end of the cable
from the positive (+) terminal of the booster battery.
Figure 3-6 Positive (+) Cable to Battery Side of Solenoid
2009-2010 HUV 4214, HUV 4414, and HUV 4414X Maintenance and Service Manual
Using a Booster Battery (Jump Starting)
Figure 3-7 Negative (-) Cable to Negative Terminal of
Weak Battery
3
Page 3-7