Operation; Installing The Battery Pack; Starting The Machine; Activating Eco Mode - Toro Flex-Force Power System 39901 Operator's Manual

Operation

Installing the Battery Pack

1. Make sure that the vents on the battery are clear
of any dust and debris.
2. Lift up the battery-compartment lid (A of
9).
3. Line up the cavity in the battery pack with the
tongue on the machine and slide the battery
pack into the compartment until it lock into place
(B of Figure 9).
4. Close the battery-compartment lid (C of
9).
Figure 9

Starting the Machine

1. Ensure that the battery pack is installed in the
machine; refer to
(page
2. Insert the electric-start button into the electric
starter (A of
Figure
3. Squeeze the bail and hold it to the handle (B
and C of
Note:
turn on and the battery-charge indicator lights on
the battery illuminate.
4. Press the electric-start button until the motor
Figure
starts (D of
g282250

Activating ECO Mode

Using ECO mode may extend battery life by reducing
rotor speed; use ECO mode whenever you are
moving snow a short distance. Activate ECO mode
using the ECO switch as shown in
11
Installing the Battery Pack
11).
Figure 10).
Figure 10).
When you squeeze the bail, the lights
Figure 10).
Figure 10
g288479
Figure 8.