T E C H N I C A L
W O R K B O O K
Horizontal Streaks near the Edge of the Image at 175mm Intervals
On installation or relocation of the Main Engine, at replacement of parts in the Fixing Assembly, or use of glossy
or colored media, an uneven Horizontal Streak at 175mm intervals may appear near the edge of paper. This
symptom occurs when the Refresh Roller comes in contact with the Fixing Belt.
This is a recoverable symptom. Perform the subsequent work before replacement of the Fixing Belt Unit or
Pressure Belt Unit.
1) Refresh the Fixing Belt from (Settings/Registration) > [Adjustment/Maintenance] > [Maintenance] >
[Refresh the Fixing Belt].
2) After the Refresh operation has completed, execute printing again. If the effectiveness is insufficient,
perform the Refresh of the Fixing Belt again.
175 mm
25