Canon imagePRESS C800 Series Technical Workbook page 14

T E C H N I C A L W O R K B O O K
The Shaft [1] is not seated properly due to improper positioning when mounted. Use care because the
Shaft appears as if it is fitted properly when it is looked at from the front [A].
[1]
[A]
Use care to ensure the Positioning Hook [1] does not disengage from the Positioning Cutout [2] when
joined together.
[2]
[1]
When engaged properly, there is no gap left between the Pressure Belt Unit and the Pressure Belt
Displacement Control Motor Unit.
8