Canon imagePRESS C800 Series Technical Workbook page 17

T E C H N I C A L W O R K B O O K
1-1) Look at the Pressure Belt Unit from its top and confirm if the Flange on the Bearing [1] is inside
the Support Plate [2] and there is no gap [A] left between the Bearing and the Support Plate in side
view.
1-2) If there is a gap, push the Bearing [1] from outside [A] to seat it in the correct position.
[1]
[A]
[2]
[1]
[A]
[1]
[A]
11