Installation Procedure - Heatmiser NeoAir V2-M Manual

Installation Procedure

Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don't
Do not install near to a direct heat source as this will a ect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.
This wireless thermostat is designed to be surface mounted.
Step 1
Carefully separate the front half of the thermostat from the back plate by placing a
small at head terminal driver into the slots on the bottom face of the thermostat.
Step 2
Mark 2 hole positions on the wall using the back plate as a positioning template.
Drill at the marked positions and insert a wall plug into each hole.
Step 3
Screw the thermostat back plate securely on the wall.
Step 4
Clip the front of the thermostat back onto the thermostat back plate.
3
Series
neo