Advertisement
WARNlNG:
Do not install, operate, or service this machine unless:
(1) You have to read and understand the safety instructions on the pages that
follow.
(2) You have to read and understand the MlCROWEILY operator's manual,
especially knowing the function and locations of all machine controls and
read manuals for any related accessories.
(3) You have to read and understand all safety and instruction plates attached to
the machine and its related accessories.
(4) Prior to installing or servicing the machine read and understand the
MICROWEILY maintenance manual, servicing the machine must be done only
by competent and trained personnel.
NOTE:
The MlCROWElLY's operation manual and maintenance manual, each
containing a copy of these safety instructions, should be keep in the vicinity of
the machine so they are accessible to the operator and maintenance personel.
The following safety instructions are general recommendations for most common
operations on a turning machine.
Additional safety measures may be required for your particular application,
MlCROWEILY therefore, makes no warranty or representation as to the absolute
correctness or suffi ciency of the instructions.
1. 1GENERAL SAFETY INSTRUCTIONS FOR OPERATING THE MACHINE
(1) The best defense against injuries on a turning machine is to be alert, never
initiate a machine function unless you completely understand what the
function will cause the machine to do.
(2) Never operate the machine with any cover or shield open or removed.
(3) Never reach into the work area when the spindle is turning or if the machine is
in automatic mode.
(4) Put the machine in manual mode and be sure last programmed function has be
completed before reaching inside of the work area
-3-
Advertisement
