Advertisement
I.Before connecting the power, please notice that the power arrangement of the
machine for the spindle requires according to your order to MICROWEILY plus
transformer. The way of how to connect the wires is indicated inside the
inverter, please input the right voltage then test if the output is exactly 220VAC,
then connect to the machine if the output is correct.
2.Before power on, scrutinize if every equipment is complete and fi xed in the
proper place.
3.Input the power after everything is checked normal, press down the emergency
button before turning on the power switch on, you can release the button if
everything come out OK., this is a must procedure for the every fi rst installation.
4.When the power is turned on, press the RESET key to check if the rotating
directions of spindle and coolant motor are correct.
5.Check if the lub is functioning and infuse to prevent table from damage.
6.Do not pile stuff within operating range.
7.Before turning the power on, please check:
(1) Inspect if any external damage on cord, if yes, contact local dealer.
Inspect if any damage on CNC panel or screen, ·if yes, contact local dealer.
(2) Fill up the lubrication in the lub tank.
(3) Check if any wire dropped off.
(4) Check up the accessories against the list.
-44-
Advertisement
