Advertisement
(3) Before fi rst operating the machine after un-packing or keeping the
machine idle for a long period (several or more), each sliding parts
must be freshly lubricated, keep lubricating oil pump working until
oil oozes out from wiper.
(4) Oil reservoirs should be fi lled to indicated levels, check and add oil,
if necessary.
(5) For lubricating points, oil brands and appropriate levels, see the
various instruction plates.
(6) Switches And levers should operate smoothly.
(7) When switching machine on, put the factory feeder switch, the
machine main circuit breaker and the power switch on the operating
panel to the "ON" position in the order.
(8) Check the coolant level, and add coolant, if necessary.
1.6.3 After Control Power Switch Has Been Turned On
CAUTION:
When the power switch on, the operating panel is "ON" position as described is
7 above, the READY lamp should be also be check.
1.6.4 Routine Inspections
WARNING:
When checking belt tensions, keep your fi ngers away between belt and pulley.
CAUTION:
(1)
Check pressure gages for proper readings.
(2)
Check motors, headstock and other parts for abnormal noises.
(3)
Check the motor lubrication and sliding parts for evidence of proper
lubrication.
(4)
Check safety covers and safety devices for proper operation.
(5)
Check belt tensions, replace any set of belts that has become stretched with a
fresh matching set.
-12-
Advertisement
