Advertisement
3.1 INSTALLATION
3.1.1 General Preparations & Selecting Location
To upgrade the operation effi ciency and accuracy of precision machining,
a proper foundation is required.
The machine body is not allowed to be exposed to sunshine or rain, please be sure
not install the machine adjacent to planing machine (milling machine, molding or
punching machine), it will result in poor performance.
It is required at least 20" (500mm) distance from machine to wall and objects
or between machines to ensure easy reparation, cleaning and maintenance of
machine as well as easy opening of the door of electric cabinet.
3.1.2 Foundation
With special torque resistant capability at the machine base, this machine requires
no particular foundation, provide 6" (150mm) thick of concrete on fl oor and leave
space of component for leveling.
Do not use wood foundation which with nature of un-stability, may cause the
machine to move gradually.
Install the machine on the fi rst or second fl oor, careful consideration if machine
can be loaded.
3.1.3 Foundation layout
Please dig holes in six places as big as shown in Figure 1 for setting foundation
bolts, place the bolts in the holes then fi ll the holes with cement, lift the machine
on the bolts after the cement has turned into solid concrete, then fi x the bolts with
screw nuts.
-25-
Advertisement
