The Safety System - Toro Wheel Horse 13-32XLE Operator's Manual

3
Figure 10
1. Start
2. On
Stopping
1. Move the throttle lever to Slow (Fig. 9).
2. Turn the ignition key to Off (Fig. 10).

The Safety System

Caution
If safety interlock switches are disconnected or
damaged the machine could operate unexpectedly,
causing personal injury.
Do not tamper with the interlock switches.
Check the operation of the interlock switches
daily and replace any damaged switches before
operating the machine.
Replace switches every two years regardless of
whether they are operating properly or not.
Understanding the Safety System
The safety system is designed to prevent the engine from
starting unless:
The clutch/brake pedal is depressed.
The PTO is Disengaged.
The safety system is designed to stop the engine if you rise
from the seat when the clutch/brake pedal is released or the
blade is Engaged.
2
1
3. Off
15
Setting the KeyChoice Switch to
Operate in Reverse
An interlock feature on the tractor prevents the power take
off (PTO) from operating when backing up. If you shift into
reverse with the PTO engaged (i.e., with mower blades or
other attachment running), the engine will stop. Do not
mow in reverse unless absolutely necessary.
If you need to use the PTO while backing up, you can turn
off this interlock feature using the KeyChoice switch
located near the seat bracket (Fig. 11).
Danger
You could back over a child or bystander while the
mower blade(s) or other attachment is engaged
and cause serious injury or death.
Do not mow in reverse unless absolutely
necessary.
Do not insert the KeyChoice key unless it is
absolutely necessary.
Always look backward and down before
backing up.
Use the KeyChoice switch only if you are certain
no children or other bystanders will enter the
mowing area.
Be very observant after deactivating the
interlock because the sound of the engine may
prevent you from noticing that a child or
bystander has entered the work area.
Always remove both the ignition and KeyChoice
keys and put them in a safe place out of the
reach of children or unauthorized users when
leaving the unit unattended.
1. Engage the PTO.
2. Insert the KeyChoice key into the switch (Fig. 11).
Figure 11
1. KeyChoice switch
1