Parking Brake; Positioning The Seat; Headlights; Using The Blade Control (Pto) - Toro Wheel Horse 13-32XLE Operator's Manual

Parking Brake

Always set the parking brake when you stop the machine or
leave it unattended.
Setting the Parking Brake
1. Push the clutch/brake pedal (Fig. 3) down and hold it in
the depressed position.
2. Lift the parking brake lever (Fig. 3) up and gradually
take your foot off of the clutch/brake pedal. The
clutch/brake pedal should stay in the depressed (locked)
position.
Releasing the Parking Brake
1. Push down on the clutch/brake pedal (Fig. 3). The
parking brake lever should release.
2. Gradually release the clutch/brake pedal.
2
Figure 3
1. Clutch/brake pedal

Positioning the Seat

The seat can move forward and backward. Position the seat
where you have the best control of the machine and are
most comfortable.
1. Raise the seat and loosen the adjustment knob (Fig. 4).
2. Move the seat to the desired position and tighten the
knob.
1
m–1880
2. Parking brake lever
13
Figure 4
1. Adjustment knob

Headlights

Headlights are optional on some models. A dash-mounted
On/Off switch (Fig. 2) controls the headlights. The lights
only shine while the engine is running and the switch is On.

Using the Blade Control (PTO)

The blade control (PTO) engages and disengages power to
the blade(s).
Engaging the Blade(s)
1. Depress the clutch/brake pedal to stop the machine.
2. Move the blade control (PTO) to Engaged (Fig. 5).
2
1
Figure 5
1. Disengaged
2. Engaged
1
m–1862
3
m–1852
3. Blade control (PTO)