Table of Contents
Advertisement
S
ERVICE
T
DVD
O REMOVE THE
1 Shut down, and then open the ColorPASS (see pages
To remove the DVD drive, you must remove the left, right, and front panels, the component
sled, and the switch bank assembly.
2 Remove the power and data combination cable from the back of the DVD drive.
3 Remove the component sled from the chassis, and then remove the switch bank assembly
from the component sled (see
4 Remove the four screws that secure the DVD drive to the switch bank assembly.
Set aside the screws so that you can replace them later.
On some systems, a small metal post in the switch bank assembly is used in place of
N
:
OTE
one of the screws.
5 Remove the DVD drive from the switch bank assembly.
Screw
(1 of 4)
F
38:
IGURE
P
ROCEDURES
DRIVE
page
Removing/replacing the DVD drive
48
and 51).
97).
Component sled
Screw (1 of 3)
Switch bank assembly
DVD drive
Some switch bank assemblies
N
:
OTE
have a metal post in this location that
is used in place of the screw.
Switch bank assembly
101
Advertisement
Table of Contents
