When White Streaks Appear On Prints (Cleaning The Dust Proof Glass) - Canon imageRUNNER ADVANCE C350iF Starter Manual

03
Clean the document feed scanning
area (thin glass strip) and the white plate.
1. Open the feeder.
2. Clean the document feed scanning area.
3. Clean the white plate.
3
2
4. Close the feeder.
CAUTION
When closing the feeder, be careful not to get your
fingers caught, as this may result in personal injury.
NOTE
When the glass cleaning sheet is dirty, rinse it with
water and spread it out to let it dry.
04
Close the feeder cover.
CAUTION
When closing the feeder cover, be careful not to get
your fingers caught, as this may result in personal
injury.
60
Routine Cleaning
1
When White Streaks Appear on Prints
(Cleaning the Dust Proof Glass)
When white streaks or other print defects occur, the dust
proof glass may be dirty. Follow the procedure below to
clean the dust proof glass.
01
Open the front cover of the main unit.
02
Remove the dust proof glass cleaner
from the rear side of the front cover of the
main unit.