Automatic Upgrade - Huawei eSpace 6805 Administrator's Manual

eSpace 6805 IP Phone
Administrator Guide
5.

Automatic Upgrade

eSpace 6805 support automatic upgrade.
1.
2.
3.
Issue 01 (2014-01-06)
If the parameter is set to No, the phone is allowed to obtain the firmware upgrade server
address when obtaining an IP address through the DHCP server. The configuration is
performed on the DHCP server. The obtained firmware upgrade server address
overwrites the value of Firmware Server Path set in
Figure 3-35 Set DHCP Option43 and Option66 to override server
Click Save and Apply.
----End
Enable automatic upgrade. On the Maintenance > Upgrade and Provisioning page,
select Yes for Automatic Upgrade and set the proper interval for checking the version.
The default value is 10080, and the minimum value is 60, in minutes.
Figure 3-36 Automatic Upgrade
Enable version check. On the Maintenance > Upgrade and Provisioning page, select
Always Check for New Firmware for Firmware Upgrade and Provisioning.
Figure 3-37 Firmware Upgrade and Provisioning
Set the mode of eSpace 6805 and the upgrade server. Select HTTP in Upgrade Via and
enter the HTTP server address in the Firmware Server Path text box, namely, IP
address of the computer where loading files are stored. The domain name and IP address
are supported.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration and Loading Files
Step 3.
50