Huawei eSpace 6805 Administrator's Manual page 155

eSpace 6805 IP Phone
Administrator Guide
Using the RTP to Analyze 2833 Packets
To use the RTP to analyze 2833 packets, proceed as follows:
1.
2.
3.
Issue 01 (2014-01-06)
Use the Wireshark to open the bearer network port captured file in .pcap or .cap format.
Enter (rtp) && (rtp.p_type > 34) or rtpevent in the Filter text box.
Press Enter.
All files that are transferred using RFC 2833 in the captured information are filtered out,
as shown in Figure 6-81.
Figure 6-81 RTP information
2833 packets use the sampling mode to send a number for multiple times. Numbers are
separated by RTP packets whose Event is TRUE, as shown in
procedure for sending the number 6 is used as an example.
− The message "End of Event: False" in the packet parsing area indicates that the
number 6 has not been sent completely.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Appendix
Figure 6-82. The
153