Product Overview; Controls - Toro TX 427 Operator's Manual

Product Overview

1. Track
2. Track-adjustment chamber
3. Lift cylinder
4. Cylinder lock

Controls

Become familiar with all the controls
you start the engine and operate the traction unit.
Control Panel
1. Auxiliary hydraulics lever
2. Throttle lever
3. Choke lever
4. Fuel gauge
5. Hydraulic-fluid-temperature
light
6. Hour meter/tachometer
7. Key switch
5. Loader arms
6. Hood
7. Auxiliary hydraulic couplers 11. Control panel
8. Tilt cylinder
(Figure 4) before
Figure 4
8. Loader-arm/attachment-tilt
lever
9. Loader-valve lock
10. Parking-brake lever
11. Traction control
12. Reference bar
13. Loader-control-reference
bar
Figure 3
9. Mount plate
10. Tie-down/lift loop
12. Rear-access cover
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke
to keep the engine running smoothly. As soon as
possible, move the choke lever all the way rearward.
Note:
A warm engine requires little or no choking.
g013120
Reference Bar
When driving the traction unit, use the reference bar
as a handle and a leverage point for controlling the
traction control and the auxiliary-hydraulics lever. To
ensure smooth, controlled operation, do not take
both hands off the reference bar while operating the
machine.
9
13. Fuel tank
14. Reverse-safety plate
, R , and S . Refer to
FF UN TART
15).
g005550