Toro TX 427 Operator's Manual page 10

Traction Control
1. Reference bar
2. Traction control
•
To move forward, move the traction control forward
(Figure 6).
•
To move rearward, move the traction control
rearward (Figure 7).
Important:
When reversing, look behind you
for obstructions and keep your hands on the
reference bar.
Figure 5
Figure 6
Figure 7
•
To turn right, rotate the traction control clockwise
(Figure 8).
g008128
•
To turn left, rotate the traction control
counterclockwise
g008129
•
To stop the machine, release the traction control
(Figure 5).
Note:
The farther you move the traction control in
any direction, the faster the machine moves in that
direction.
Loader Arm/Attachment-Tilt Lever
•
To tilt the attachment forward, slowly move the
lever to the right
•
To tilt the attachment rearward, slowly move the
lever to the left
•
To lower the loader arms, slowly move the lever
forward (Figure
•
To raise the loader arms, slowly move the lever
rearward (Figure
g008130
•
To lower the loader arms to a detent (float)
position, push the lever fully forward
Note:
This allows attachments such as the leveler
and the hydraulic blade to follow the contours of
the ground (i.e., float) when grading.
10
Figure 8
(Figure 9).
Figure 9
(Figure 10).
(Figure 10).
10).
10).
(Figure
g008131
g008132
10).