(Optional) Combine cabinets.
4.3
1. Remove the front and rear
doors of the PDC and level
the PDC, as shown by (1)
in the figure.
2. Remove the cabinet
connecting plates from the
rack, as shown by (2) in
the figure.
3. Secure the connecting
plates in the connection
positions on the front door
using screws, as shown by
(3) in the figure.
4. Use the same method to
secure the connecting
plates in the connection
positions on the rear door.
5. Repeat the preceding
steps to combine other
PDCs.
6. Reinstall the front and rear
doors of the PDC.
7. Use a torque wrench to
tighten the bolts in
diagonal order.
NOTE
1. A connecting plate is initially secured by one screw. Remove the screw from the column of the
adjacent cabinet to secure the connecting plate.
2. Ensure that both the vertical deviation and the distances between cabinets are within 3 mm after
the cabinets are combined.
8